Home >  Products
HEF5208M-2SFP
HEF5208M-2SFP
  • System Design
  • Features
  • Specifications
  • Ordering Information
  • Document Download

HEF5208M-2SFP is a Layer 2, network managed Industrial Ethernet Fiber Switch with eight (8) 10/100Base-T/TX ports and designed to transmit and receive 10/100Mbps data over two selectable SFP options. Units feature MDI/MDIX Full/Half Duplex Auto-Negotiation, 10/100Base Auto-sensing and compatibility with major Network Protocols. The optical interfaces operate at a 100Mbps Ethernet rate. Redundant ring, plug-and-play performance, ensures ease of installation; no user electrical or optical adjustments are required. Features included are advanced network management functions as QoS, VLAN, IGMP, snooping/GMRP, Port Trunking, SNMP V1/V2/V3 RTSP/STP and LLDP; low power consumption, LED indicators for monitoring equipment link, operating status activity and auto resettable voltage transient fuses. Additionally, they are designed with DINRail or Wall mount, fan-less, IP40 rated Aluminum enclosures in industrial extended
temperature version. With dual (2) redundant inputs 12- 55VDC voltage, the Series HEF5208M-2SFP are outstanding products in transmission of 10/100Mbps Ethernet signals for industrial Layer 2 Managed Network Installation.

● IEEE802.1x Compatible
● Layer 2 Network Managed Switch
● Eight (8) 10/100BASE-T/TX Copper Ports
● Two (2) 100Mbps SFP Ports
● Redundant Ring with <20ms Link Switchover
● Network Standards: IEEE802.3 10BaseT, IEEE802.3u
10BaseT/TX and 100BaseFX, IEEE802.3x Flow Control,
IEEE1588PTP, IEEE100Base-x
● Network Protocols: IGMP V1/V2/V3, GMRP, GVRP, SNMP
V1/V2C/V3, DHCP, TFTP, SNTP, SMTP, RMON, HTTP, HTTPS,
TELNET, SSH, SYSLOG
● Supports RSTP / STP 802.1w/d/s, IEEE802.1D
● Enhanced mechanisms through QoS, TOS / DiffServ
● Supports VLAN, QVLAN IEEE 802.1q, IEEE802.1AD for
Network Management
● Employs 802.3ad, LACP for Bandwidth Optimization
● Supports ACL and Hardware Filtration
● Supports LLDP for Network Topology Discovery, IEEE802.1AB
● LED Indicators for Link, Activity, Data Rate
● Configuring, Debugging via Web, Telnet, SSH, Serial Port
● Port Loopback for Broadcast Storm Protection
● Port Locking for Authorized MAC Address Access
● Relay Alarm Output for Power Failure
● Din-rail, Wall Mount, fan-less Aluminum Enclosure
● Industrial Temperature Version, IP40 Protection
● 12-55VDC Voltage, Dual (2) Inputs
● Compliance with CE, FCC, ROHS
● PoE or PoE+ Selectable
DATA
Data Interface: 8 x 10/100Base -T/TX, RJ-45 ports
Data Rate: 10/100Mbps
SWITCH PROPERTIES
MAC Table: 8K
Switching Delay: <96μs
Packet Buffer: 4Mbit
Processing Type: Store and Forward
Port Locking Address: For Authorized only
Priority queues: 4
Maximum # of VLANs: 4094
IGMP groups: 256
POE PARAMETERS
Power of PoE: 48V, 15.4W
Power of PoE+: 48V, 25.5W
CONNECTORS
Optical: SFP Dependent
Power: Terminal Block
Electrical: 8 x RJ-45
Management Console: RS-232, RJ-45
OPTICAL PARAMETERS
Fiber Type: Depend on SFP modules
Wavelength Multimode: Depend on SFP modules
Wavelength Singlemode: Depend on SFP modules
ALARM RELAY
Power Failure Relay: 1A @24VDC

ELECTRICAL/MECHANICAL
Input Power: 12-55VDC with dual input
Power Consumption: 133.2W Max with PoE on all ports; 250W Max with PoE+ on all ports; 10W Max w/o PoE
Rev. Connect/Redundancy: Support
Overload Circuitry: Support
Housing / Protection Class: Aluminum, fan-less / IP40
Dimensions (W×H×D):

2.2x 6.9 x 5.3in(55.8 x 176 x 134mm)

Weight: 1065g
Installation: DIN-Rail / Wall mount
ENVIRONMENTAL
Operating Temp: -40°F to 185°F; -40°C to 85°C
Storage Temp: 58°F to 212°F; -50°C to 100°C
Relative Humidity: 5 - 95% non-condensing
MTBF: 411,000 hrs
REGULATORY APPROVALS
EMI: FCC Part 15, EN55022 Class A
EMS: IEC61000-4-2, 4.3, 4.4, 4.5
IEC61000-4.6, 4.8, 4.9, 4.10 4.11
Vibration: IEC60068-2-6
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Industrial: IEC61000-6-2, IEC61850-3
Safety: CE/EN60950
Compliance: ROHS
MIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, Private MIB, RMON MIB Group1, 2, 3, 9
MODEL DESCRIPTION FIBER Port COPPER PORT DISTANCE
HEF5208M-2SFP 8 x 10/100Base-T/Tx Ports,2 x 100M SFP Slots 2 8 See SFP options for optional distances, fiber type and connector type.
HEF5208M-2SFP-8POE 8 x 10/100Base-T/Tx Ports, 15W PoE,2 x 100M SFP Slots 2 8
HEF5208M-2SFP-8POE+ 8 x 10/100Base-T/Tx Ports, 30W PoE+, 2 x 100M SFP Slots 2 8